Alto Compact Portable PA System

Specifications

Mixer Section

• Microphone/Line Input
• Frequency Response: 10Hz to 55kHz +/-3 dB
• Microphone Input Impedance: 3.9kO
• Line Input Impedance: 10kO
• Microphone Input S/N ratio: >94dB
• Microphone Inputs: Balanced XLR connectors
• Line Inputs: Balanced/unbalanced, 1/4" (6.3mm.) TRS jack connectors
• Tape Inputs: Unbalanced RCA jack
• Inputs Distortion (THD&N): 0.04% at 0dBu, 1kHz
• Channel EQ: High shelving +/-15dB @ 12kHz
• Low shelving +/-15dB @ 80Hz
• Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
• DSP Section: 24-bit HALL, ROOM, VOCAL, PLATE, STEREO DELAY, REV+DELAY, and REV+CHORUS combinations
• Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
• Output Master EQ: 7-band, +/-15dB @ 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
• Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3mm.) MONITOR OUT jack

Speakers Section

• System Type: 2-way Coax Vented Box
• Frequency Response: 65Hz-20kHz @ -10dB
• Spherical Horn Coverage: 70H°×70V°
• Continuous Power: 150W AES Standard (each speaker)
• Peak Power: 300W Peak (each speaker)
• Protection: Electronic circuit on driver
• Speaker specifications: 10" (254mm.) Low Frequency Driver /
• 2" (50.8mm.) Voice Coil
• 1" (25.4mm.) Neodymium High
• Frequency Driver / 1" (25.4mm.) Voice Coil
• Input connectors: 1/4" (6.3mm) mono (TS) jack on each cabinet

Amplifier Section

• Output Power: 300W (RMS) 350W (EIAJ)
• Impedance: 4O
• Protections: Overload / Short  Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling

Standard Package

• 2 speakers cables
• 1 power cord
• 2 microphone cables
• Stands are not included